TubeLink
FEATURES | DOCUMENTATION | AUDIO DRIVER | DOWNLOAD | FAQ | CONTACT
Ai_logo

Use Google translate  

Configuration

Description of Mirror Screen on Smart TV general tab configuration items follows...


Disconnect non-responding devices...
Usually, if you switch off your TV, it sends a kind of "bye" event and Screen recognizes that the TV is about to disconnect and removes it from the Available-TVs list. If you however e.g. close you Macbook, switch-off the TV and subsequently re-open Mac, the TV remains in the "Available TVs" list because Screen missed that event.

This option allows to check all connected TVs on the background and disconnect inactive ones after 60 secs. Some older (esp. LG) models however do not communicate with their neighbourhood when they are sufficiently overloaded - thus, it can also cause unwanted disconnection. You can easily test your model and activate it, if necessary.
On app exit, return audio driver...
Screen replaces active Mac audio output with Screen audio output when it initiates new session and returns the originally selected output upon session termination. That process works fine unless the session is incorrectly terminated. If you select this switch, Screen also remembers what was the active audio output at Screen launch and restores it at the app exit (i.e. not only on per-session basis but also per app-run basis).
Force Samsung 2015-17 behaviour...
This is a backwards-compatibility switch. Do not select it unless you experience problems with session initiation of a 2015-7 Samsung model (we strongly believe that you will not need it).
Replace 2160p with UHD...
All profiles are denoted by their height (i.e. 480p, 720p, 1080p, 1440p and 2160p). If this switch is selected, "2160p" profiles are in the profile list replaced with "4K Ultra HD" string.
Show 4K UHD label...
If you don't like the UHD logo, you can remove it from the panel.